Veterinary Clinic Epoxy that survives the room
Urine, claws and aggressive disinfectant. Most jobs need one day of our time and none of yours.
Odour stops living in the slab.
What we actually install
Non-porous coved system that resists ammonia.
Concrete varies street to street around here, so we check. Animal traffic, hosing and scratching.
Talk to us about this floor or call 601-319-9619.
How the day runs
Grind
Non-porous coved system that resists ammonia.
Build
Animal traffic, hosing and scratching.
Cure
Most houses are done inside a day, then 12 hours to foot traffic.
What the install actually looks like
Every job starts the same way, with the slab itself.
First we make the slab ready, then the finish is the easy part. We turn up with the grinder and the extraction first, and the first hour is dust and noise rather than anything that looks like progress. Non-porous coved system that resists ammonia.
Once the slab is open and clean we chase any cracks, fill them, and grind those flat. Then the primer goes down, and from that point the day is a sequence with cure windows in it rather than a job you can rush. A typical garage is a one day install. You are walking on it that evening.
Kevin founded ICM Coating Masters in 2021 and still runs jobs himself. That matters on a veterinary clinic epoxy job because the person who decided the spec is the person holding the squeegee, so nothing gets lost between the quote and the floor.
Aaron and his crew did a fantastic job, friendly and professional.Verified review
Other medical floors we coat
The slab decides the spec.
What we find under a veterinary clinic epoxy job
Where a floor has been patched repeatedly with different products, each patch behaves differently under a grinder and under resin. Sometimes the right call is removing the patches entirely.
A slab poured in sections often has slight height differences at the seams. Those get ground flat rather than coated over, because a coating follows the shape it is laid on.
The system we specify
The chip blend changes how a floor hides dirt. Multi-tone blends with some dark in them stay looking clean far longer than a single pale colour.
Moisture-tolerant primers exist for a reason and cost more for a reason. On a damp slab they are the difference between a floor and a warranty claim.
Specified from the load, not a brochure.
Seamless is the whole specification
In a clinical room the floor is an infection control surface. Every joint, every grout line and every junction between floor and wall is somewhere organic material can sit where cleaning does not reach. A poured resin floor with coved skirting removes those places entirely, which is why it is specified for theatres and clean areas rather than tile.
The second requirement is chemical tolerance. Clinical cleaning is aggressive and continuous, and it is the cleaning rather than the foot traffic that destroys an unsuitable floor. We choose the resin against the disinfectant regime that is actually in use, and we detail the coving to the drains so the room can be washed rather than mopped.
One day on site for most homes. Full cure for vehicles is 48 hours.
What clinical work involves
Urine, claws and aggressive disinfectant.
What this floor has to put up with
Animal traffic, hosing and scratching. Non-porous coved system that resists ammonia. That combination is what we specify against, and it is why a veterinary clinic epoxy job is quoted from the room rather than from a rate card.
Odour stops living in the slab. You lose the garage for a day, not a week.
Living with the floor afterwards
If a crack appears in the slab years later, that is the concrete moving, not the coating failing. It can be chased and repaired without redoing the floor.
Maintenance is a dust mop and occasionally a neutral cleaner. No wax, no sealing, no annual reapplication. If someone tells you a coated floor needs yearly maintenance, they are describing their own product failing.
We work out of Laurel and cover roughly a hundred miles in every direction. That takes in Jones County, Rankin, Simpson and Lamar to the north and west, the whole Mississippi coast from Bay St. Louis through Biloxi to Pascagoula, across into Baldwin and Mobile County in Alabama, and west to St. Tammany Parish. See the areas we cover.
Questions we get asked
How long will my floor be out of use?
Most jobs need one day of our time and none of yours.
What happens to the slab before you coat it?
Non-porous coved system that resists ammonia. First we make the slab ready, then the finish is the easy part.
Will it stand up to the traffic here?
Animal traffic, hosing and scratching. We specify the build thickness against the actual use, not a standard sheet.
Do you come out to the coast?
Yes. We cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish, roughly a hundred miles out from Laurel.
Do you use subcontractors?
The reason quality holds is that the family name is on every job.
Can I see the colour before deciding?
Yes. We bring the chip deck out and you pick the blend against your own light and your own walls. Colours read differently under LED, under a skylight and under a garage door that is half open, so choosing off a photograph is how people end up disappointed.
Is an old slab a problem?
Commercial slabs that have been in service take oil deep into the pores. Surface degreasing does not reach it, and resin will not bond through it. We grind it out, and where contamination runs deep we prime with something built to tolerate it.
How do I look after it?
Warehouse floors want a scrubber with the right pad, not the most aggressive one available.
Why not just use floor paint?
Primers, base, broadcast and topcoat are four separate products that have to be compatible. Mixing brands across layers is how delamination happens.
Call and describe the floor. We will know most of it from that.
Started 2021, family owned, and the people on your floor are the people who own it. Serving Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. See finished floors or get in touch.