Pet Grooming Epoxy that survives the room
Water, hair and claws. Single day turnaround on typical residential slabs.
Hoses down without soaking the slab.
What we actually install
Non-slip coved system that hoses out.
No two slabs in Jones County behave the same way. Constant wet, animal traffic.
Talk to us about this floor or call 601-319-9619.
How the day runs
Grind
Non-slip coved system that hoses out.
Build
Constant wet, animal traffic.
Cure
One visit, one day, then 48 hours before the car goes back on.
What the install actually looks like
Moisture gets tested before resin gets opened.
We start by finding the cracks nobody mentioned. We turn up with the grinder and the extraction first, and the first hour is dust and noise rather than anything that looks like progress. Non-slip coved system that hoses out.
Once the slab is open and clean we chase any cracks, fill them, and grind those flat. Then the primer goes down, and from that point the day is a sequence with cure windows in it rather than a job you can rush. Most residential floors go down in a single day. Walk on it in 12 hours, move heavy things at 24, park on it at 48.
One crew, four names, and the founder on site. That is the whole company. That matters on a pet grooming epoxy job because the person who decided the spec is the person holding the squeegee, so nothing gets lost between the quote and the floor.
Aaron and his crew did a fantastic job, friendly and professional.Verified review
Other trades floors we coat
The slab decides the spec.
What we find under a pet grooming epoxy job
Garage aprons and interior slabs are usually separate pours at different times, and they move independently. The transition between them gets detailed deliberately so the coating does not split along that line.
New pours need to cure before they are coated, and the wait is longer than most people expect. Coating green concrete traps water under the film. We would rather push the date than come back to a blistered floor.
The system we specify
Metallic pigment is moved by hand while the resin is still open, so no two floors are the same. That is the appeal and it also means the installer matters more than the product.
Pigments are not all equally stable. Reds and yellows fade fastest under UV, so exterior work uses pigments chosen for it rather than the same colours we would use in a closed garage.
Specified from the load, not a brochure.
Small floors, specific problems
A small commercial floor is not a scaled down warehouse. The problems are concentrated. One wet area, one chair that rotates in the same spot every day, one chemical that gets spilled constantly. Specifying the whole room for the worst square metre is usually cheaper than specifying it for the average and repairing the worst part later.
The other reality is that these rooms cannot close. A barbershop or a salon loses its income the day it shuts. That pushes the work to a single overnight or weekend install with a fast-cure system, which is entirely doable as long as it is planned that way from the start rather than discovered halfway through.
We grind, coat and topcoat in one visit on most residential jobs.
How we handle small commercial work
Water, hair and claws.
What this floor has to put up with
Constant wet, animal traffic. Non-slip coved system that hoses out. That combination is what we specify against, and it is why a pet grooming epoxy job is quoted from the room rather than from a rate card.
Hoses down without soaking the slab. Single day turnaround on typical residential slabs.
Living with the floor afterwards
Expect the finish to look the same in five years if it is looked after. That is the point of specifying properly rather than cheaply.
Expect the finish to look the same in five years if it is looked after. That is the point of specifying properly rather than cheaply.
Laurel is home, and from here we reach Hattiesburg, Jackson, the Gulf Coast, coastal Alabama and the north shore of Lake Pontchartrain comfortably. Coast jobs and Baldwin County work are a normal week for us. See the areas we cover.
Questions we get asked
How quickly can this be done?
Single day turnaround on typical residential slabs.
Do you grind the floor first?
Non-slip coved system that hoses out. What goes wrong with coatings almost always goes wrong underneath them.
What kind of wear can it take?
Constant wet, animal traffic. We specify the build thickness against the actual use, not a standard sheet.
Where abouts do you work?
Yes. We cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish, roughly a hundred miles out from Laurel.
Who am I actually hiring?
Kevin Garner founded ICM in 2021 wanting work he could hand down. Aaron, Kyler and Averie make that possible.
Can I see the colour before deciding?
Yes. We bring the chip deck out and you pick the blend against your own light and your own walls. Colours read differently under LED, under a skylight and under a garage door that is half open, so choosing off a photograph is how people end up disappointed.
What if the floor is damp?
New pours need to cure before they are coated, and the wait is longer than most people expect. Coating green concrete traps water under the film. We would rather push the date than come back to a blistered floor.
Do I need to reseal it?
Do not drag steel across it. Lift it, or put something under it.
What stops it peeling?
Polyaspartic topcoats cure faster and hold colour better under UV than standard epoxy clears. They also go down in a wider temperature window, which matters when you are working through a Mississippi summer.
Reach out and we will schedule a look at the slab.
The crew is family. That is why the quote and the finished floor match. Serving Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. See finished floors or get in touch.