Ellisville floor coatings, done in a day
Ten minutes from the shop. A mix of older in-town slabs and newer builds out toward the college, so we quote both ends of the range here. Most residential floors go down in a single day. Walk on it in 12 hours, move heavy things at 24, park on it at 48.
Jones County, MS
Floors we coat around Ellisville
Ten minutes from the shop. A mix of older in-town slabs and newer builds out toward the college, so we quote both ends of the range here.
A lot of the slabs we open up have been sealed at some point with an acrylic nobody remembers. It reads as clean concrete until the diamonds hit it and the surface loads up. That is a full mechanical removal, not a light scuff, and it changes the day.
What a Ellisville job usually involves
Humidity is the constant in this part of the state. It affects cure times, it affects how the resin flows, and in summer it means working earlier in the day rather than pushing through the afternoon.
One day install, 12 hours to walk, 48 to drive.
Patios and porches are the other half of the residential work in this area. Exterior concrete goes grey, grows algae in the shade and turns slick when it rains, and a UV-stable textured coating solves all three at once.
Humidity is the constant in this part of the state. It affects cure times, it affects how the resin flows, and in summer it means working earlier in the day rather than pushing through the afternoon.
The slab decides the spec.
Before we quote anything
A slab that has been acid etched instead of ground has an inconsistent profile. Some areas take the coating and some do not, and you cannot tell which until it fails. We grind regardless of what was done before.
Coving at the wall turns a floor into a sealed basin. In kitchens, kennels and wet rooms that detail is the whole point, because water stops finding the joint between floor and wall.
Living with it afterwards
Maintenance is a dust mop and occasionally a neutral cleaner. No wax, no sealing, no annual reapplication. If someone tells you a coated floor needs yearly maintenance, they are describing their own product failing.
A dust mop twice a week does more for the look of a floor than any product you can buy.
Most asked for here
Everything else is on the services page.
Commercial work around Ellisville
Driveway aprons are worth mentioning because they are a separate pour from the garage slab and they move independently. The transition between them gets detailed deliberately rather than coated straight across.
Where a garage has been used as a workshop there is usually oil worked deep into the pores in one or two spots. Surface cleaning does not reach it. We grind it out and prime over what is left.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the colour
Moisture, contamination and surface profile are the three things that decide whether a floor lasts. Colour is the easy part and the only part most people ask about.
A slab poured in sections often has slight height differences at the seams. Those get ground flat rather than coated over, because a coating follows the shape it is laid on.
Cure times are temperature dependent, and a garage in August behaves differently from the same garage in January. We schedule around it rather than pretending it does not matter.
Grinding is most of the job.
Getting to you
Laurel is home, and from here we reach Hattiesburg, Jackson, the Gulf Coast, coastal Alabama and the north shore of Lake Pontchartrain comfortably. Coast jobs and Baldwin County work are a normal week for us.
Ellisville sits in Jones County. See the other towns we cover on the Jones County page or the full service areas list.
Used a lot of flooring companies over the years on various jobs and lemme tell you you’re in good hands with these guys. From the quote to the finished job they were nothing short of professional.Verified review
How the day runs
We look at the concrete first and the colour chart second. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. Single day install is standard here. The waiting afterwards is just cure time.
The reason quality holds is that the family name is on every job. Nothing gets lost between the quote and the floor because it is the same people doing both.
Expect the finish to look the same in five years if it is looked after. That is the point of specifying properly rather than cheaply. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Ellisville questions
Do you cover Ellisville?
Yes. We are based in Laurel and Ellisville is inside our normal working radius.
How long does a garage take?
A day on site is the normal answer for a residential floor.
What is the slab likely to need?
Ten minutes from the shop. A mix of older in-town slabs and newer builds out toward the college, so we quote both ends of the range here.
Can you match a colour?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Jones County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Call and we will give you the real answer.
Aaron, Kyler and Averie work with Kevin on every install. That is by design. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.