Medical Office Epoxy that survives the room
Infection control and hospital cleaners. A typical garage is a one day install. You are walking on it that evening.
No seams means nothing to hide in.
What we actually install
Seamless coved floor with no joints to harbour.
The floor tells us what it needs before we quote anything. Trolleys, chairs and daily disinfection.
Talk to us about this floor or call 601-319-9619.
How the day runs
Grind
Seamless coved floor with no joints to harbour.
Build
Trolleys, chairs and daily disinfection.
Cure
One day down for most homes. Commercial work is phased to your hours.
What the install actually looks like
Before anything is mixed we know what the floor is sitting on.
Prep is most of the work and all of the reason coatings last. We turn up with the grinder and the extraction first, and the first hour is dust and noise rather than anything that looks like progress. Seamless coved floor with no joints to harbour.
Once the slab is open and clean we chase any cracks, fill them, and grind those flat. Then the primer goes down, and from that point the day is a sequence with cure windows in it rather than a job you can rush. A day on site is the normal answer for a residential floor.
Kevin started it in 2021. Five years on it is still the same four people. That matters on a medical office epoxy job because the person who decided the spec is the person holding the squeegee, so nothing gets lost between the quote and the floor.
Choosing somebody to do our Floors was a hard decision but I am so happy we picked ICM coating masters. The results are beautiful and The time and effort put into the work was amazing.Verified review
Other medical floors we coat
The slab decides the spec.
What we find under a medical office epoxy job
Gulf Coast concrete carries moisture. Slabs poured on sand without a vapor barrier wick water up through the mix continuously, and that vapor pressure is what lifts a coating months after it looked perfect. We test for it before quoting, because the honest answer sometimes is a moisture-tolerant system rather than standard epoxy.
Concrete keeps moving for years after it is poured, and it moves more near the coast where the ground is wet and sandy. That is why we detail edges and joints rather than laying one continuous rigid sheet and hoping.
The system we specify
Polyaspartic topcoats cure faster and hold color better under UV than standard epoxy clears. They also go down in a wider temperature window, which matters when you are working through a Mississippi summer.
The chip blend changes how a floor hides dirt. Multi-tone blends with some dark in them stay looking clean far longer than a single pale color.
Specified from the load, not a brochure.
Seamless is the whole specification
In a clinical room the floor is an infection control surface. Every joint, every grout line and every junction between floor and wall is somewhere organic material can sit where cleaning does not reach. A poured resin floor with coved skirting removes those places entirely, which is why it is specified for theatres and clean areas rather than tile.
The second requirement is chemical tolerance. Clinical cleaning is aggressive and continuous, and it is the cleaning rather than the foot traffic that destroys an unsuitable floor. We choose the resin against the disinfectant regime that is actually in use, and we detail the coving to the drains so the room can be washed rather than mopped.
One day down for most homes. Commercial work is phased to your hours.
What clinical work involves
Infection control and hospital cleaners.
What this floor has to put up with
Trolleys, chairs and daily disinfection. Seamless coved floor with no joints to harbour. That combination is what we specify against, and it is why a medical office epoxy job is quoted from the room rather than from a rate card.
No seams means nothing to hide in. A typical garage is a one day install. You are walking on it that evening.
Living with the floor afterwards
Keep grit off it and a coated floor lasts. Grit under a tire or a boot is abrasive, and abrasion is the only thing that genuinely wears a good topcoat.
Maintenance is a dust mop and occasionally a neutral cleaner. No wax, no sealing, no annual reapplication. If someone tells you a coated floor needs yearly maintenance, they are describing their own product failing.
Laurel is home, and from here we reach Hattiesburg, Jackson, the Gulf Coast, coastal Alabama and the north shore of Lake Pontchartrain comfortably. Coast jobs and Baldwin County work are a normal week for us. See the areas we cover.
Questions we get asked
How long will my floor be out of use?
A typical garage is a one day install. You are walking on it that evening.
What happens to the slab before you coat it?
Seamless coved floor with no joints to harbour. Every job starts the same way, with the slab itself.
Will it stand up to the traffic here?
Trolleys, chairs and daily disinfection. We specify the build thickness against the actual use, not a standard sheet.
Do you come out to the coast?
We cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish, roughly a hundred miles out from Laurel.
Do you use subcontractors?
Kevin Garner founded ICM in 2021 wanting work he could hand down. Aaron, Kyler and Averie make that possible.
Can I see the color before deciding?
Yes. We bring the chip deck out and you pick the blend against your own light and your own walls. Colors read differently under LED, under a skylight and under a garage door that is half open, so choosing off a photograph is how people end up disappointed.
Is an old slab a problem?
New pours need to cure before they are coated, and the wait is longer than most people expect. Coating green concrete traps water under the film. We would rather push the date than come back to a blistered floor.
How do I look after it?
If something is spilled that should not be there, wipe it rather than leaving it to sit. Coatings are resistant, not immune, and contact time is what decides whether resistance matters.
Why not just use floor paint?
Cementitious urethane costs more than epoxy and outlives it in any wet or thermally cycled room. In a brewery or a food plant it is not an upgrade, it is the correct product.
Ring the shop and we will tell you honestly what it takes.
The reason quality holds is that the family name is on every job. Serving Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. See finished floors or get in touch.