Hospital Epoxy that survives the room
24 hour use and zero tolerance on hygiene. Most houses are done inside a day, then 12 hours to foot traffic.
Installed ward by ward without closing.
What we actually install
Seamless coved flooring installed in live phases.
A coating is only as good as the grind under it. Beds, trolleys and continuous cleaning.
Talk to us about this floor or call 601-319-9619.
How the day runs
Grind
Seamless coved flooring installed in live phases.
Build
Beds, trolleys and continuous cleaning.
Cure
We are in and out in a day on most garages, then the floor cures.
What the install actually looks like
Moisture gets tested before resin gets opened.
We test the slab before we promise a finish. We turn up with the grinder and the extraction first, and the first hour is dust and noise rather than anything that looks like progress. Seamless coved flooring installed in live phases.
Once the slab is open and clean we chase any cracks, fill them, and grind those flat. Then the primer goes down, and from that point the day is a sequence with cure windows in it rather than a job you can rush. Single day install is standard here. The waiting afterwards is just cure time.
The reason quality holds is that the family name is on every job. That matters on a hospital epoxy job because the person who decided the spec is the person holding the squeegee, so nothing gets lost between the quote and the floor.
Choosing somebody to do our Floors was a hard decision but I am so happy we picked ICM coating masters. The results are beautiful and The time and effort put into the work was amazing.Verified review
Other medical floors we coat
The slab decides the spec.
What we find under a hospital epoxy job
Commercial slabs that have been in service take oil deep into the pores. Surface degreasing does not reach it, and resin will not bond through it. We grind it out, and where contamination runs deep we prime with something built to tolerate it.
Slabs around Laurel and down toward the coast are mostly 1970s to 1990s pours, and they were finished hard. A hard-troweled surface has almost no porosity left, which is why paint peels off it in sheets. Grinding opens that surface back up so resin can key into the concrete instead of sitting on top of it.
The system we specify
Pigments are not all equally stable. Reds and yellows fade fastest under UV, so exterior work uses pigments chosen for it rather than the same colours we would use in a closed garage.
Metallic pigment is moved by hand while the resin is still open, so no two floors are the same. That is the appeal and it also means the installer matters more than the product.
Specified from the load, not a brochure.
Seamless is the whole specification
In a clinical room the floor is an infection control surface. Every joint, every grout line and every junction between floor and wall is somewhere organic material can sit where cleaning does not reach. A poured resin floor with coved skirting removes those places entirely, which is why it is specified for theatres and clean areas rather than tile.
The second requirement is chemical tolerance. Clinical cleaning is aggressive and continuous, and it is the cleaning rather than the foot traffic that destroys an unsuitable floor. We choose the resin against the disinfectant regime that is actually in use, and we detail the coving to the drains so the room can be washed rather than mopped.
Residential floors are usually a one day job start to finish.
What clinical work involves
24 hour use and zero tolerance on hygiene.
What this floor has to put up with
Beds, trolleys and continuous cleaning. Seamless coved flooring installed in live phases. That combination is what we specify against, and it is why a hospital epoxy job is quoted from the room rather than from a rate card.
Installed ward by ward without closing. One day install, 12 hours to walk, 48 to drive.
Living with the floor afterwards
A coated floor can be repaired in place. Damage gets ground back locally, rebuilt and blended, which is not possible with tile or with polished concrete.
In a commercial kitchen the cleaning routine is the maintenance plan, and the floor is specified around the chemistry you already use.
Laurel is home, and from here we reach Hattiesburg, Jackson, the Gulf Coast, coastal Alabama and the north shore of Lake Pontchartrain comfortably. Coast jobs and Baldwin County work are a normal week for us. See the areas we cover.
Questions we get asked
How long does a hospital epoxy job take?
Most houses are done inside a day, then 12 hours to foot traffic.
What preparation does hospital epoxy need?
Seamless coved flooring installed in live phases. We test the slab before we promise a finish.
Can it take the wear this room gets?
Beds, trolleys and continuous cleaning. We specify the build thickness against the actual use, not a standard sheet.
Which areas do you cover?
Yes. We cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish, roughly a hundred miles out from Laurel.
Is it your own crew?
Kevin started it in 2021. Five years on it is still the same four people.
Can I see the colour before deciding?
Yes. We bring the chip deck out and you pick the blend against your own light and your own walls. Colours read differently under LED, under a skylight and under a garage door that is half open, so choosing off a photograph is how people end up disappointed.
What do you find under a floor like this?
Some floors do not need coating at all. If the slab is sound and the use is light, polishing or sealing the concrete itself is cheaper and lasts longer. We will say so.
What maintenance does it need?
Warehouse floors want a scrubber with the right pad, not the most aggressive one available.
What am I paying for in the build?
Primers, base, broadcast and topcoat are four separate products that have to be compatible. Mixing brands across layers is how delamination happens.
Pick up the phone and ask. No pressure either way.
Family run since 2021, and the same four people who quote your floor are the ones who install it. Serving Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. See finished floors or get in touch.