Flowood floor coatings, done in a day
More commercial than residential for us. Medical offices, retail and light industrial along Lakeland, where the work is usually phased around trading hours. Most jobs need one day of our time and none of yours.
Rankin County, MS
Floors we coat around Flowood
More commercial than residential for us. Medical offices, retail and light industrial along Lakeland, where the work is usually phased around trading hours.
Concrete that has been under carpet or tile carries adhesive, and old adhesives vary from water soluble to essentially permanent. Identifying which one is on the floor decides whether it is a grinding job or a full removal.
What a Flowood job usually involves
Patios and porches are the other half of the residential work in this area. Exterior concrete goes grey, grows algae in the shade and turns slick when it rains, and a UV-stable textured coating solves all three at once.
We are in and out in a day on most garages, then the floor cures.
Humidity is the constant in this part of the state. It affects cure times, it affects how the resin flows, and in summer it means working earlier in the day rather than pushing through the afternoon.
Most of what we do in a town like this is residential garages, and the pattern repeats: a slab poured with the house, sealed once by a previous owner, and now dusting badly and stained where the car parks. The fix is mechanical. Grind the sealer off, open the concrete, patch what needs patching and build the system back up properly.
The slab decides the spec.
Before we quote anything
Power troweled warehouse floors are the hardest substrate we deal with. The surface is dense, sealed by the process itself, and needs aggressive metal-bond diamonds before anything will stick.
The chip blend changes how a floor hides dirt. Multi-tone blends with some dark in them stay looking clean far longer than a single pale colour.
Living with it afterwards
Snow and road salt tracked in should be rinsed off rather than left to dry. Salt is more aggressive to the concrete than to the coating.
If a crack appears in the slab years later, that is the concrete moving, not the coating failing. It can be chased and repaired without redoing the floor.
Most asked for here
Everything else is on the services page.
Commercial work around Flowood
Older neighbourhoods mean older slabs, and older slabs mean previous coatings. Finding out what is already on the floor is the first thing we do, because removing an old acrylic changes the length of the job.
Storage rooms, laundry rooms and utility spaces come up often enough to mention. Small floors, quick installs, and usually the same system as a garage at a smaller scale.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the colour
Where a floor has been patched repeatedly with different products, each patch behaves differently under a grinder and under resin. Sometimes the right call is removing the patches entirely.
A lot of the slabs we open up have been sealed at some point with an acrylic nobody remembers. It reads as clean concrete until the diamonds hit it and the surface loads up. That is a full mechanical removal, not a light scuff, and it changes the day.
The chip blend changes how a floor hides dirt. Multi-tone blends with some dark in them stay looking clean far longer than a single pale colour.
Grinding is most of the job.
Getting to you
From Laurel we cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish. If you are inside about a hundred miles, we will come and look at the slab.
Flowood sits in Rankin County. See the other towns we cover on the Rankin County page or the full service areas list.
Used a lot of flooring companies over the years on various jobs and lemme tell you you’re in good hands with these guys. From the quote to the finished job they were nothing short of professional.Verified review
How the day runs
We open up the surface and see what we are actually dealing with. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. We grind, coat and topcoat in one visit on most residential jobs.
This is a family crew. Kevin founded it in 2021 and works alongside Aaron, Kyler and Averie. Nothing gets lost between the quote and the floor because it is the same people doing both.
Keep the drains clear in a wet room. Standing water is not a problem for the coating and is a problem for everything else. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Flowood questions
Do you cover Flowood?
Yes. We are based in Laurel and Flowood is inside our normal working radius.
How long does a garage take?
Grind in the morning, coat in the afternoon, walk on it that night.
What is the slab likely to need?
More commercial than residential for us. Medical offices, retail and light industrial along Lakeland, where the work is usually phased around trading hours.
Can you match a colour?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Rankin County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
A quick call tells you more than a website can.
Kevin Garner set this up in 2021 for his family to carry on. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.