Pearl floor coatings, done in a day
Older housing stock close to the river, and slabs nearer the floodplain need a moisture check before anything is quoted. Most jobs need one day of our time and none of yours.
Rankin County, MS
Floors we coat around Pearl
Older housing stock close to the river, and slabs nearer the floodplain need a moisture check before anything is quoted.
Concrete that has been under carpet or tile carries adhesive, and old adhesives vary from water soluble to essentially permanent. Identifying which one is on the floor decides whether it is a grinding job or a full removal.
What a Pearl job usually involves
The honest answer for most homes in this area is that it is a one day job on a sound slab, and the only thing that changes that is what we find when we start grinding.
A day on site is the normal answer for a residential floor.
Storage rooms, laundry rooms and utility spaces come up often enough to mention. Small floors, quick installs, and usually the same system as a garage at a smaller scale.
The honest answer for most homes in this area is that it is a one day job on a sound slab, and the only thing that changes that is what we find when we start grinding.
The slab decides the spec.
Before we quote anything
A lot of the slabs we open up have been sealed at some point with an acrylic nobody remembers. It reads as clean concrete until the diamonds hit it and the surface loads up. That is a full mechanical removal, not a light scuff, and it changes the day.
Cementitious urethane costs more than epoxy and outlives it in any wet or thermally cycled room. In a brewery or a food plant it is not an upgrade, it is the correct product.
Living with it afterwards
Keep the drains clear in a wet room. Standing water is not a problem for the coating and is a problem for everything else.
The honest maintenance answer is that there is almost none, and that is most of why people choose it.
Most asked for here
Everything else is on the services page.
Commercial work around Pearl
Patios and porches are the other half of the residential work in this area. Exterior concrete goes grey, grows algae in the shade and turns slick when it rains, and a UV-stable textured coating solves all three at once.
Humidity is the constant in this part of the state. It affects cure times, it affects how the resin flows, and in summer it means working earlier in the day rather than pushing through the afternoon.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the colour
Gulf Coast concrete carries moisture. Slabs poured on sand without a vapour barrier wick water up through the mix continuously, and that vapour pressure is what lifts a coating months after it looked perfect. We test for it before quoting, because the honest answer sometimes is a moisture-tolerant system rather than standard epoxy.
Power troweled warehouse floors are the hardest substrate we deal with. The surface is dense, sealed by the process itself, and needs aggressive metal-bond diamonds before anything will stick.
Where chemical exposure is specific, the resin is chosen against the actual list. Novolac epoxies handle acids that standard epoxy does not.
Grinding is most of the job.
Getting to you
From Laurel we cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish. If you are inside about a hundred miles, we will come and look at the slab.
Pearl sits in Rankin County. See the other towns we cover on the Rankin County page or the full service areas list.
Choosing somebody to do our Floors was a hard decision but I am so happy we picked ICM coating masters. The results are beautiful and The time and effort put into the work was amazing.Verified review
How the day runs
The honest answer about a floor comes from grinding a patch of it. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. You lose the garage for a day, not a week.
We are not a franchise. Kevin, Aaron, Kyler and Averie are the company. Nothing gets lost between the quote and the floor because it is the same people doing both.
The honest maintenance answer is that there is almost none, and that is most of why people choose it. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Pearl questions
Do you cover Pearl?
Yes. We are based in Laurel and Pearl is inside our normal working radius.
How long does a garage take?
Most of our residential installs are complete within a single working day.
What is the slab likely to need?
Older housing stock close to the river, and slabs nearer the floodplain need a moisture check before anything is quoted.
Can you match a colour?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Rankin County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Talk it through with the people who will do the work.
Kevin started it in 2021. Five years on it is still the same four people. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.