Waveland floor coatings, done in a day
Almost entirely post-Katrina rebuild, much of it elevated. Garage and carport slabs at ground level see standing water, so moisture tolerance matters. Single day turnaround on typical residential slabs.
Hancock County, MS
Floors we coat around Waveland
Almost entirely post-Katrina rebuild, much of it elevated. Garage and carport slabs at ground level see standing water, so moisture tolerance matters.
Power troweled warehouse floors are the hardest substrate we deal with. The surface is dense, sealed by the process itself, and needs aggressive metal-bond diamonds before anything will stick.
What a Waveland job usually involves
Humidity is the constant in this part of the state. It affects cure times, it affects how the resin flows, and in summer it means working earlier in the day rather than pushing through the afternoon.
One visit, one day, then 48 hours before the car goes back on.
Most of what we do in a town like this is residential garages, and the pattern repeats: a slab poured with the house, sealed once by a previous owner, and now dusting badly and stained where the car parks. The fix is mechanical. Grind the sealer off, open the concrete, patch what needs patching and build the system back up properly.
Humidity is the constant in this part of the state. It affects cure times, it affects how the resin flows, and in summer it means working earlier in the day rather than pushing through the afternoon.
The slab decides the spec.
Before we quote anything
Commercial slabs that have been in service take oil deep into the pores. Surface degreasing does not reach it, and resin will not bond through it. We grind it out, and where contamination runs deep we prime with something built to tolerate it.
Dark floors show dust and light floors show tire marks. There is no color that hides everything, and we would rather say that than sell a finish that disappoints.
Living with it afterwards
Coated floors do not need to be stripped and resealed, which is where the savings against VCT actually come from.
A dust mop twice a week does more for the look of a floor than any product you can buy.
Most asked for here
Everything else is on the services page.
Commercial work around Waveland
Garages here tend to be attached, which changes two things. The dust has somewhere to go, so containment matters more, and the slab usually shares a pour with the house foundation, so movement is less of a problem than on a detached shop.
Where a garage has been used as a workshop there is usually oil worked deep into the pores in one or two spots. Surface cleaning does not reach it. We grind it out and prime over what is left.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the color
Concrete that has been under carpet or tile carries adhesive, and old adhesives vary from water soluble to essentially permanent. Identifying which one is on the floor decides whether it is a grinding job or a full removal.
Exterior concrete has UV and thermal cycling on top of everything else. Materials that are fine indoors amber and chalk outside, so exterior work gets a UV-stable topcoat as standard.
Dark floors show dust and light floors show tire marks. There is no color that hides everything, and we would rather say that than sell a finish that disappoints.
Grinding is most of the job.
Getting to you
From Laurel we cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish. If you are inside about a hundred miles, we will come and look at the slab.
Waveland sits in Hancock County. See the other towns we cover on the Hancock County page or the full service areas list.
Choosing somebody to do our Floors was a hard decision but I am so happy we picked ICM coating masters. The results are beautiful and The time and effort put into the work was amazing.Verified review
How the day runs
Before anything is mixed we know what the floor is sitting on. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. Most houses are done inside a day, then 12 hours to foot traffic.
Kevin Garner set this up in 2021 for his family to carry on. Nothing gets lost between the quote and the floor because it is the same people doing both.
Furniture and jack stands want pads under them. Point loads with sharp edges are the realistic way a residential floor gets damaged. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Waveland questions
Do you cover Waveland?
Yes. We are based in Laurel and Waveland is inside our normal working radius.
How long does a garage take?
Most of our residential installs are complete within a single working day.
What is the slab likely to need?
Almost entirely post-Katrina rebuild, much of it elevated. Garage and carport slabs at ground level see standing water, so moisture tolerance matters.
Can you match a color?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Hancock County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Talk it through with the people who will do the work.
Kevin started it in 2021. Five years on it is still the same four people. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.