Cleary floor coatings, done in a day
The fastest growing part of the Jackson metro, which means a steady supply of new slabs and new garages. Single day install is standard here. The waiting afterwards is just cure time.
Rankin County, MS
Floors we coat around Cleary
The fastest growing part of the Jackson metro, which means a steady supply of new slabs and new garages.
A lot of the slabs we open up have been sealed at some point with an acrylic nobody remembers. It reads as clean concrete until the diamonds hit it and the surface loads up. That is a full mechanical removal, not a light scuff, and it changes the day.
What a Cleary job usually involves
Storage rooms, laundry rooms and utility spaces come up often enough to mention. Small floors, quick installs, and usually the same system as a garage at a smaller scale.
The whole system goes down in one visit on most homes.
Sheds and outbuildings on slab are worth coating if they are being used for anything beyond storage. Unsealed concrete in an outbuilding is the dustiest floor most people own.
Garages here tend to be attached, which changes two things. The dust has somewhere to go, so containment matters more, and the slab usually shares a pour with the house foundation, so movement is less of a problem than on a detached shop.
The slab decides the spec.
Before we quote anything
Moisture, contamination and surface profile are the three things that decide whether a floor lasts. Colour is the easy part and the only part most people ask about.
Polished concrete uses a densifier that reacts chemically with the slab, hardening it rather than coating it. There is nothing to peel because there is no film.
Living with it afterwards
The honest maintenance answer is that there is almost none, and that is most of why people choose it.
A coated floor can be repaired in place. Damage gets ground back locally, rebuilt and blended, which is not possible with tile or with polished concrete.
Most asked for here
Everything else is on the services page.
Commercial work around Cleary
We get asked about basements less here than on higher ground, but where there is one it is damp by default, and a coating that works in a garage will not necessarily hold down there.
Patios and porches are the other half of the residential work in this area. Exterior concrete goes grey, grows algae in the shade and turns slick when it rains, and a UV-stable textured coating solves all three at once.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the colour
A slab that has been acid etched instead of ground has an inconsistent profile. Some areas take the coating and some do not, and you cannot tell which until it fails. We grind regardless of what was done before.
New pours need to cure before they are coated, and the wait is longer than most people expect. Coating green concrete traps water under the film. We would rather push the date than come back to a blistered floor.
We install Duraflex systems. The certification matters less than what it means in practice, which is that the product data is real, the cure windows are tested, and there is a manufacturer standing behind the spec rather than a generic resin bought on price.
Grinding is most of the job.
Getting to you
We work out of Laurel and cover roughly a hundred miles in every direction. That takes in Jones County, Rankin, Simpson and Lamar to the north and west, the whole Mississippi coast from Bay St. Louis through Biloxi to Pascagoula, across into Baldwin and Mobile County in Alabama, and west to St. Tammany Parish.
Cleary sits in Rankin County. See the other towns we cover on the Rankin County page or the full service areas list.
Aaron and his crew did a fantastic job, friendly and professional.Verified review
How the day runs
No two slabs in Jones County behave the same way. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. Grind in the morning, coat in the afternoon, walk on it that night.
Started 2021, family owned, and the people on your floor are the people who own it. Nothing gets lost between the quote and the floor because it is the same people doing both.
Sunlight through a garage door will fade a cheap floor unevenly along the door line. UV-stable topcoats exist precisely for that. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Cleary questions
Do you cover Cleary?
Yes. We are based in Laurel and Cleary is inside our normal working radius.
How long does a garage take?
We are in and out in a day on most garages, then the floor cures.
What is the slab likely to need?
The fastest growing part of the Jackson metro, which means a steady supply of new slabs and new garages. Where a floor has been patched repeatedly with different products, each patch behaves differently under a grinder and under resin. Sometimes the right call is removing the patches entirely.
Can you match a colour?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Rankin County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Get in touch and we will come measure it up.
Kevin built the company in 2021 around doing the work they promised. The crew has not changed. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.