Monterey floor coatings, done in a day
The fastest growing part of the Jackson metro, which means a steady supply of new slabs and new garages. The whole system goes down in one visit on most homes.
Rankin County, MS
Floors we coat around Monterey
The fastest growing part of the Jackson metro, which means a steady supply of new slabs and new garages.
Concrete that has been under carpet or tile carries adhesive, and old adhesives vary from water soluble to essentially permanent. Identifying which one is on the floor decides whether it is a grinding job or a full removal.
What a Monterey job usually involves
Humidity is the constant in this part of the state. It affects cure times, it affects how the resin flows, and in summer it means working earlier in the day rather than pushing through the afternoon.
The whole system goes down in one visit on most homes.
We see a lot of two-car garages where only half the floor has ever been parked on, and the wear pattern is obvious once the grinder starts. That does not change the spec, but it does explain why one side looks worse.
Detached shops and workshops are common on the bigger lots, and those slabs are a different job. They are often unsealed, frequently damp because there is no vapour barrier underneath, and they have usually had something spilled on them. Moisture testing decides the system.
The slab decides the spec.
Before we quote anything
Basement and below-grade slabs are damp by default. A coating that works in a garage will not necessarily hold down there, so those rooms get a system chosen for moisture rather than for looks.
Moisture-tolerant primers exist for a reason and cost more for a reason. On a damp slab they are the difference between a floor and a warranty claim.
Living with it afterwards
Do not drag steel across it. Lift it, or put something under it.
Sunlight through a garage door will fade a cheap floor unevenly along the door line. UV-stable topcoats exist precisely for that.
Most asked for here
Everything else is on the services page.
Commercial work around Monterey
Storage rooms, laundry rooms and utility spaces come up often enough to mention. Small floors, quick installs, and usually the same system as a garage at a smaller scale.
Older neighbourhoods mean older slabs, and older slabs mean previous coatings. Finding out what is already on the floor is the first thing we do, because removing an old acrylic changes the length of the job.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the colour
Older residential slabs in Jones County often have a soft top layer from being finished too wet. It looks solid and crumbles under a grinder. If we find that, the fix is grinding past it to sound concrete rather than coating over a layer that is already failing.
A lot of the slabs we open up have been sealed at some point with an acrylic nobody remembers. It reads as clean concrete until the diamonds hit it and the surface loads up. That is a full mechanical removal, not a light scuff, and it changes the day.
Moisture-tolerant primers exist for a reason and cost more for a reason. On a damp slab they are the difference between a floor and a warranty claim.
Grinding is most of the job.
Getting to you
The service area runs from Jones County out to the coast and along it. Gulfport, Biloxi, Ocean Springs and Pascagoula in Mississippi, Gulf Shores and Foley in Alabama, Covington and Slidell in Louisiana.
Monterey sits in Rankin County. See the other towns we cover on the Rankin County page or the full service areas list.
Choosing somebody to do our Floors was a hard decision but I am so happy we picked ICM coating masters. The results are beautiful and The time and effort put into the work was amazing.Verified review
How the day runs
No two slabs in Jones County behave the same way. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. We grind, coat and topcoat in one visit on most residential jobs.
A family operation out of Laurel, running since 2021. Nothing gets lost between the quote and the floor because it is the same people doing both.
Keep the drains clear in a wet room. Standing water is not a problem for the coating and is a problem for everything else. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Monterey questions
Do you cover Monterey?
Yes. We are based in Laurel and Monterey is inside our normal working radius.
How long does a garage take?
One day down for most homes. Commercial work is phased to your hours.
What is the slab likely to need?
The fastest growing part of the Jackson metro, which means a steady supply of new slabs and new garages. A slab that has been acid etched instead of ground has an inconsistent profile. Some areas take the coating and some do not, and you cannot tell which until it fails. We grind regardless of what was done before.
Can you match a colour?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Rankin County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Call the crew direct.
One crew, four names, and the founder on site. That is the whole company. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.