
Rankin County floor coatings
The fastest growing part of the Jackson metro, which means a steady supply of new slabs and new garages. Single day turnaround on typical residential slabs.
Towns we cover in Rankin County
Rankin County
What we install here
Commercial slabs that have been in service take oil deep into the pores. Surface degreasing does not reach it, and resin will not bond through it. We grind it out, and where contamination runs deep we prime with something built to tolerate it.
Epoxy is the body of the system and polyaspartic is the armour. The epoxy bonds and builds thickness, the topcoat takes the abrasion and the UV. Using one without the other is where most cheap floors go wrong.
Thickness is specified from the load, not from a brochure. A residential garage and a forklift aisle both get epoxy, and they are not the same floor.
The systems people ask about most
Full flake
Full flake broadcast means chip thrown to refusal, so the floor is a continuous layer of vinyl rather than a base coat with decoration on it. That is what gives the texture its grip and what stops the colour wearing through. More on full flake.
Metallic
Metallic pigment is moved by hand while the resin is still open, so no two floors are the same. That is the appeal and it also means the installer matters more than the product. More on metallic.
Polished concrete
Polished concrete uses a densifier that reacts chemically with the slab, hardening it rather than coating it. There is nothing to peel because there is no film. More on polished concrete.
Moisture, contamination and surface profile are the three things that decide whether a floor lasts. Colour is the easy part and the only part most people ask about.
Hot tyre pickup is a failure mode of cheap coatings, not of a properly installed flake and polyaspartic build. You can park on it hot without lifting the finish.
We see a lot of two-car garages where only half the floor has ever been parked on, and the wear pattern is obvious once the grinder starts. That does not change the spec, but it does explain why one side looks worse.
What Rankin County jobs usually involve
Patios and porches are the other half of the residential work in this area. Exterior concrete goes grey, grows algae in the shade and turns slick when it rains, and a UV-stable textured coating solves all three at once.
Most of our residential installs are complete within a single working day.
Pool surrounds are seasonal work here. The concrete gets hot underfoot and slick when wet, and a textured coating with a cooler pigment fixes both.
A lot of the calls we take start with somebody having tried a big-box garage floor kit. Those sit on top of sealed concrete and peel, and the removal is more work than the original job would have been.
Living with the floor
Warehouse floors want a scrubber with the right pad, not the most aggressive one available.
Warehouse floors want a scrubber with the right pad, not the most aggressive one available.
Most asked for
Commercial and industrial work in Rankin County
Where a garage has been used as a workshop there is usually oil worked deep into the pores in one or two spots. Surface cleaning does not reach it. We grind it out and prime over what is left.
Garages here tend to be attached, which changes two things. The dust has somewhere to go, so containment matters more, and the slab usually shares a pour with the house foundation, so movement is less of a problem than on a detached shop.
Epoxy is the body of the system and polyaspartic is the armour. The epoxy bonds and builds thickness, the topcoat takes the abrasion and the UV. Using one without the other is where most cheap floors go wrong.
Where we are coming from
Laurel is home, and from here we reach Hattiesburg, Jackson, the Gulf Coast, coastal Alabama and the north shore of Lake Pontchartrain comfortably. Coast jobs and Baldwin County work are a normal week for us.
Full list on the service areas page.
How the day runs
The slab sets the spec, not the brochure. The grinder and the extraction come in first, and the opening stretch of any job is dust control rather than visible progress.
Once the slab is open we chase the cracks, take down the high spots and remove whatever was on the floor before. Most jobs need one day of our time and none of yours.
One crew, four names, and the founder on site. That is the whole company.
A coated floor can be repaired in place. Damage gets ground back locally, rebuilt and blended, which is not possible with tile or with polished concrete. Blends are on the finishes page and finished work is in the gallery.
Rankin County questions
Which towns in Rankin County do you cover?
All of them. Brandon, Cleary, Florence, Flowood, Goshen Springs, Langford, Monterey, Pearl.
How far will you travel?
We work out of Laurel and cover roughly a hundred miles in every direction. That takes in Jones County, Rankin, Simpson and Lamar to the north and west, the whole Mississippi coast from Bay St. Louis through Biloxi to Pascagoula, across into Baldwin and Mobile County in Alabama, and west to St. Tammany Parish.
Residential and commercial?
Both. Garages and patios through to kitchens, warehouses and clinics.
How long does an install take?
A day on site is the normal answer for a residential floor.
What about the slab condition?
Salt is the quiet problem on coast jobs. It comes in on tyres, soaks into unsealed concrete, and sits there pushing back out. Grinding removes the loaded surface layer so the new floor is not fighting it from day one.
How do I start?
Call 601-319-9619 or send the details and we will come look.
Get us out to see it. That is the only way to be accurate.
Family run out of Laurel since 2021, Duraflex certified. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.