Slidell floor coatings, done in a day
A lot of post-Katrina rebuild and elevation work, and slabs near the bayou run damp. Moisture-tolerant systems are common here. You lose the garage for a day, not a week.
St. Tammany Parish, LA
Floors we coat around Slidell
A lot of post-Katrina rebuild and elevation work, and slabs near the bayou run damp. Moisture-tolerant systems are common here.
Older residential slabs in Jones County often have a soft top layer from being finished too wet. It looks solid and crumbles under a grinder. If we find that, the fix is grinding past it to sound concrete rather than coating over a layer that is already failing.
What a Slidell job usually involves
Where a garage has been used as a workshop there is usually oil worked deep into the pores in one or two spots. Surface cleaning does not reach it. We grind it out and prime over what is left.
Single day install is standard here. The waiting afterwards is just cure time.
Storage rooms, laundry rooms and utility spaces come up often enough to mention. Small floors, quick installs, and usually the same system as a garage at a smaller scale.
Older neighbourhoods mean older slabs, and older slabs mean previous coatings. Finding out what is already on the floor is the first thing we do, because removing an old acrylic changes the length of the job.
The slab decides the spec.
Before we quote anything
Power troweled warehouse floors are the hardest substrate we deal with. The surface is dense, sealed by the process itself, and needs aggressive metal-bond diamonds before anything will stick.
Polished concrete uses a densifier that reacts chemically with the slab, hardening it rather than coating it. There is nothing to peel because there is no film.
Living with it afterwards
The honest maintenance answer is that there is almost none, and that is most of why people choose it.
The honest maintenance answer is that there is almost none, and that is most of why people choose it.
Most asked for here
Everything else is on the services page.
Commercial work around Slidell
We see a lot of two-car garages where only half the floor has ever been parked on, and the wear pattern is obvious once the grinder starts. That does not change the spec, but it does explain why one side looks worse.
Where a property has been rented out the slab has usually had a harder life than the owner realises. We would rather look at it than quote off a description.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the colour
Older residential slabs in Jones County often have a soft top layer from being finished too wet. It looks solid and crumbles under a grinder. If we find that, the fix is grinding past it to sound concrete rather than coating over a layer that is already failing.
Some floors do not need coating at all. If the slab is sound and the use is light, polishing or sealing the concrete itself is cheaper and lasts longer. We will say so.
Polished concrete uses a densifier that reacts chemically with the slab, hardening it rather than coating it. There is nothing to peel because there is no film.
Grinding is most of the job.
Getting to you
From Laurel we cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish. If you are inside about a hundred miles, we will come and look at the slab.
Slidell sits in St. Tammany Parish. See the other towns we cover on the St. Tammany Parish page or the full service areas list.
Aaron and his crew did a fantastic job, friendly and professional.Verified review
How the day runs
A coating is only as good as the grind under it. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. Grind in the morning, coat in the afternoon, walk on it that night.
A family operation out of Laurel, running since 2021. Nothing gets lost between the quote and the floor because it is the same people doing both.
Keep the drains clear in a wet room. Standing water is not a problem for the coating and is a problem for everything else. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Slidell questions
Do you cover Slidell?
Yes. We are based in Laurel and Slidell is inside our normal working radius.
How long does a garage take?
We grind, coat and topcoat in one visit on most residential jobs.
What is the slab likely to need?
A lot of post-Katrina rebuild and elevation work, and slabs near the bayou run damp. Moisture-tolerant systems are common here.
Can you match a colour?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across St. Tammany Parish.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Talk to Kevin about your floor.
Kevin started ICM in 2021. The team that keeps it going is Aaron Garner, Kyler Welch and Averie Garner. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.