Tylertown floor coatings, done in a day
Rural and residential, on the Louisiana line. A standard install is one day of work and two days of patience.
Walthall County, MS
Floors we coat around Tylertown
Rural and residential, on the Louisiana line.
Moisture, contamination and surface profile are the three things that decide whether a floor lasts. Colour is the easy part and the only part most people ask about.
What a Tylertown job usually involves
A fair amount of our work around here starts as a phone call about dust. Unsealed concrete sheds fine powder constantly, it gets into everything stored in the garage, and no amount of sweeping fixes it because the floor itself is the source.
Single day install is standard here. The waiting afterwards is just cure time.
Commercial work in a town this size is usually small and specific. One wet room, one kitchen, one shop floor that has to be closed for the shortest possible time. Those jobs get planned around opening hours from the first conversation.
Where a garage has been used as a workshop there is usually oil worked deep into the pores in one or two spots. Surface cleaning does not reach it. We grind it out and prime over what is left.
The slab decides the spec.
Before we quote anything
Control joints and cracks are not the same thing and get treated differently. A control joint is doing a job and needs to stay flexible. A crack is failure and gets chased out, filled with a rigid polyurea and ground flat before anything goes over it.
We install Duraflex systems. The certification matters less than what it means in practice, which is that the product data is real, the cure windows are tested, and there is a manufacturer standing behind the spec rather than a generic resin bought on price.
Living with it afterwards
Rubber mats left permanently on a coated floor can mark it. Not damage, but a visible outline. If you use mats, move them occasionally.
Snow and road salt tracked in should be rinsed off rather than left to dry. Salt is more aggressive to the concrete than to the coating.
Most asked for here
Everything else is on the services page.
Commercial work around Tylertown
New construction is the opposite problem. The slab is clean but green, and coating concrete before it has cured traps water under the film. We would rather push the date than come back to blisters.
We get asked about basements less here than on higher ground, but where there is one it is damp by default, and a coating that works in a garage will not necessarily hold down there.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the colour
Slabs around Laurel and down toward the coast are mostly 1970s to 1990s pours, and they were finished hard. A hard-troweled surface has almost no porosity left, which is why paint peels off it in sheets. Grinding opens that surface back up so resin can key into the concrete instead of sitting on top of it.
New pours need to cure before they are coated, and the wait is longer than most people expect. Coating green concrete traps water under the film. We would rather push the date than come back to a blistered floor.
The chip blend changes how a floor hides dirt. Multi-tone blends with some dark in them stay looking clean far longer than a single pale colour.
Grinding is most of the job.
Getting to you
Laurel is home, and from here we reach Hattiesburg, Jackson, the Gulf Coast, coastal Alabama and the north shore of Lake Pontchartrain comfortably. Coast jobs and Baldwin County work are a normal week for us.
Tylertown sits in Walthall County. See the other towns we cover on the Walthall County page or the full service areas list.
Aaron and his crew did a fantastic job, friendly and professional.Verified review
How the day runs
The floor tells us what it needs before we quote anything. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. Most of our residential installs are complete within a single working day.
Kevin Garner founded ICM in 2021 wanting work he could hand down. Aaron, Kyler and Averie make that possible. Nothing gets lost between the quote and the floor because it is the same people doing both.
Keep the drains clear in a wet room. Standing water is not a problem for the coating and is a problem for everything else. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Tylertown questions
Do you cover Tylertown?
Yes. We are based in Laurel and Tylertown is inside our normal working radius.
How long does a garage take?
A typical garage is a one day install. You are walking on it that evening.
What is the slab likely to need?
Rural and residential, on the Louisiana line. Salt is the quiet problem on coast jobs. It comes in on tyres, soaks into unsealed concrete, and sits there pushing back out. Grinding removes the loaded surface layer so the new floor is not fighting it from day one.
Can you match a colour?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Walthall County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Ring the shop and we will tell you honestly what it takes.
This is a family crew. Kevin founded it in 2021 and works alongside Aaron, Kyler and Averie. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.