Greene County floor coatings
Rural east Mississippi. Workshops, barns and residential garages. Most residential floors go down in a single day. Walk on it in 12 hours, move heavy things at 24, park on it at 48.
Towns we cover in Greene County
Greene County
What we install here
Slabs around Laurel and down toward the coast are mostly 1970s to 1990s pours, and they were finished hard. A hard-troweled surface has almost no porosity left, which is why paint peels off it in sheets. Grinding opens that surface back up so resin can key into the concrete instead of sitting on top of it.
Dark floors show dust and light floors show tyre marks. There is no colour that hides everything, and we would rather say that than sell a finish that disappoints.
Where chemical exposure is specific, the resin is chosen against the actual list. Novolac epoxies handle acids that standard epoxy does not.
The systems people ask about most
Full flake
Full flake broadcast means chip thrown to refusal, so the floor is a continuous layer of vinyl rather than a base coat with decoration on it. That is what gives the texture its grip and what stops the colour wearing through. More on full flake.
Metallic
Metallic pigment is moved by hand while the resin is still open, so no two floors are the same. That is the appeal and it also means the installer matters more than the product. More on metallic.
Polished concrete
Polished concrete uses a densifier that reacts chemically with the slab, hardening it rather than coating it. There is nothing to peel because there is no film. More on polished concrete.
Moisture, contamination and surface profile are the three things that decide whether a floor lasts. Colour is the easy part and the only part most people ask about.
Snow and road salt tracked in should be rinsed off rather than left to dry. Salt is more aggressive to the concrete than to the coating.
New construction is the opposite problem. The slab is clean but green, and coating concrete before it has cured traps water under the film. We would rather push the date than come back to blisters.
What Greene County jobs usually involve
A lot of the calls we take start with somebody having tried a big-box garage floor kit. Those sit on top of sealed concrete and peel, and the removal is more work than the original job would have been.
One day down for most homes. Commercial work is phased to your hours.
Humidity is the constant in this part of the state. It affects cure times, it affects how the resin flows, and in summer it means working earlier in the day rather than pushing through the afternoon.
Most of what we do in a town like this is residential garages, and the pattern repeats: a slab poured with the house, sealed once by a previous owner, and now dusting badly and stained where the car parks. The fix is mechanical. Grind the sealer off, open the concrete, patch what needs patching and build the system back up properly.
Living with the floor
In a commercial kitchen the cleaning routine is the maintenance plan, and the floor is specified around the chemistry you already use.
Furniture and jack stands want pads under them. Point loads with sharp edges are the realistic way a residential floor gets damaged.
Most asked for
Commercial and industrial work in Greene County
The honest answer for most homes in this area is that it is a one day job on a sound slab, and the only thing that changes that is what we find when we start grinding.
Driveway aprons are worth mentioning because they are a separate pour from the garage slab and they move independently. The transition between them gets detailed deliberately rather than coated straight across.
Primers, base, broadcast and topcoat are four separate products that have to be compatible. Mixing brands across layers is how delamination happens.
Where we are coming from
Laurel is home, and from here we reach Hattiesburg, Jackson, the Gulf Coast, coastal Alabama and the north shore of Lake Pontchartrain comfortably. Coast jobs and Baldwin County work are a normal week for us.
Full list on the service areas page.
How the day runs
First we make the slab ready, then the finish is the easy part. The grinder and the extraction come in first, and the opening stretch of any job is dust control rather than visible progress.
Once the slab is open we chase the cracks, take down the high spots and remove whatever was on the floor before. A standard install is one day of work and two days of patience.
Since 2021 this has been Kevin, Aaron, Kyler and Averie. No subcontractors sent in your place.
Warehouse floors want a scrubber with the right pad, not the most aggressive one available. Blends are on the finishes page and finished work is in the gallery.
Greene County questions
Which towns in Greene County do you cover?
All of them. Leakesville.
How far will you travel?
We work out of Laurel and cover roughly a hundred miles in every direction. That takes in Jones County, Rankin, Simpson and Lamar to the north and west, the whole Mississippi coast from Bay St. Louis through Biloxi to Pascagoula, across into Baldwin and Mobile County in Alabama, and west to St. Tammany Parish.
Residential and commercial?
Both. Garages and patios through to kitchens, warehouses and clinics.
How long does an install take?
A day on site is the normal answer for a residential floor.
What about the slab condition?
Exterior concrete has UV and thermal cycling on top of everything else. Materials that are fine indoors amber and chalk outside, so exterior work gets a UV-stable topcoat as standard.
How do I start?
Call 601-319-9619 or send the details and we will come look.
Reach out and we will schedule a look at the slab.
Started 2021, family owned, and the people on your floor are the people who own it. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.