Robinhood floor coatings, done in a day
The fastest growing part of the Jackson metro, which means a steady supply of new slabs and new garages. You lose the garage for a day, not a week.
Rankin County, MS
Floors we coat around Robinhood
The fastest growing part of the Jackson metro, which means a steady supply of new slabs and new garages.
Where a floor has been patched repeatedly with different products, each patch behaves differently under a grinder and under resin. Sometimes the right call is removing the patches entirely.
What a Robinhood job usually involves
We see a lot of two-car garages where only half the floor has ever been parked on, and the wear pattern is obvious once the grinder starts. That does not change the spec, but it does explain why one side looks worse.
Most residential floors go down in a single day. Walk on it in 12 hours, move heavy things at 24, park on it at 48.
Humidity is the constant in this part of the state. It affects cure times, it affects how the resin flows, and in summer it means working earlier in the day rather than pushing through the afternoon.
Patios and porches are the other half of the residential work in this area. Exterior concrete goes grey, grows algae in the shade and turns slick when it rains, and a UV-stable textured coating solves all three at once.
The slab decides the spec.
Before we quote anything
Moisture, contamination and surface profile are the three things that decide whether a floor lasts. Colour is the easy part and the only part most people ask about.
The chip blend changes how a floor hides dirt. Multi-tone blends with some dark in them stay looking clean far longer than a single pale colour.
Living with it afterwards
Do not drag steel across it. Lift it, or put something under it.
Warehouse floors want a scrubber with the right pad, not the most aggressive one available.
Most asked for here
Everything else is on the services page.
Commercial work around Robinhood
Sheds and outbuildings on slab are worth coating if they are being used for anything beyond storage. Unsealed concrete in an outbuilding is the dustiest floor most people own.
Commercial work in a town this size is usually small and specific. One wet room, one kitchen, one shop floor that has to be closed for the shortest possible time. Those jobs get planned around opening hours from the first conversation.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the colour
Where a floor has been patched repeatedly with different products, each patch behaves differently under a grinder and under resin. Sometimes the right call is removing the patches entirely.
A lot of the slabs we open up have been sealed at some point with an acrylic nobody remembers. It reads as clean concrete until the diamonds hit it and the surface loads up. That is a full mechanical removal, not a light scuff, and it changes the day.
Polished concrete uses a densifier that reacts chemically with the slab, hardening it rather than coating it. There is nothing to peel because there is no film.
Grinding is most of the job.
Getting to you
From Laurel we cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish. If you are inside about a hundred miles, we will come and look at the slab.
Robinhood sits in Rankin County. See the other towns we cover on the Rankin County page or the full service areas list.
Aaron and his crew did a fantastic job, friendly and professional.Verified review
How the day runs
A coating is only as good as the grind under it. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. Residential floors are usually a one day job start to finish.
This is a family crew. Kevin founded it in 2021 and works alongside Aaron, Kyler and Averie. Nothing gets lost between the quote and the floor because it is the same people doing both.
Sunlight through a garage door will fade a cheap floor unevenly along the door line. UV-stable topcoats exist precisely for that. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Robinhood questions
Do you cover Robinhood?
Yes. We are based in Laurel and Robinhood is inside our normal working radius.
How long does a garage take?
We grind, coat and topcoat in one visit on most residential jobs.
What is the slab likely to need?
The fastest growing part of the Jackson metro, which means a steady supply of new slabs and new garages. Some floors do not need coating at all. If the slab is sound and the use is light, polishing or sealing the concrete itself is cheaper and lasts longer. We will say so.
Can you match a colour?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Rankin County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Talk to Kevin about your floor.
Kevin started ICM in 2021. The team that keeps it going is Aaron Garner, Kyler Welch and Averie Garner. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.