Oak Grove floor coatings, done in a day
Fast-growing area west of Hattiesburg with a lot of new construction, so slab age and cure state are the first questions. Most residential floors go down in a single day. Walk on it in 12 hours, move heavy things at 24, park on it at 48.
Lamar County, MS
Floors we coat around Oak Grove
Fast-growing area west of Hattiesburg with a lot of new construction, so slab age and cure state are the first questions.
New pours need to cure before they are coated, and the wait is longer than most people expect. Coating green concrete traps water under the film. We would rather push the date than come back to a blistered floor.
What a Oak Grove job usually involves
New construction is the opposite problem. The slab is clean but green, and coating concrete before it has cured traps water under the film. We would rather push the date than come back to blisters.
One day on site for most homes. Full cure for vehicles is 48 hours.
Pool surrounds are seasonal work here. The concrete gets hot underfoot and slick when wet, and a textured coating with a cooler pigment fixes both.
Most of what we do in a town like this is residential garages, and the pattern repeats: a slab poured with the house, sealed once by a previous owner, and now dusting badly and stained where the car parks. The fix is mechanical. Grind the sealer off, open the concrete, patch what needs patching and build the system back up properly.
The slab decides the spec.
Before we quote anything
Salt is the quiet problem on coast jobs. It comes in on tyres, soaks into unsealed concrete, and sits there pushing back out. Grinding removes the loaded surface layer so the new floor is not fighting it from day one.
Primers, base, broadcast and topcoat are four separate products that have to be compatible. Mixing brands across layers is how delamination happens.
Living with it afterwards
A coated floor can be repaired in place. Damage gets ground back locally, rebuilt and blended, which is not possible with tile or with polished concrete.
If a crack appears in the slab years later, that is the concrete moving, not the coating failing. It can be chased and repaired without redoing the floor.
Most asked for here
Everything else is on the services page.
Commercial work around Oak Grove
Where a garage has been used as a workshop there is usually oil worked deep into the pores in one or two spots. Surface cleaning does not reach it. We grind it out and prime over what is left.
Driveway aprons are worth mentioning because they are a separate pour from the garage slab and they move independently. The transition between them gets detailed deliberately rather than coated straight across.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the colour
New pours need to cure before they are coated, and the wait is longer than most people expect. Coating green concrete traps water under the film. We would rather push the date than come back to a blistered floor.
A slab that has been acid etched instead of ground has an inconsistent profile. Some areas take the coating and some do not, and you cannot tell which until it fails. We grind regardless of what was done before.
Slip resistance comes from profile, not from an additive stirred in at the end. Where a floor will be wet we build the texture in with graded aggregate and we tell you how it will feel underfoot.
Grinding is most of the job.
Getting to you
From Laurel we cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish. If you are inside about a hundred miles, we will come and look at the slab.
Oak Grove sits in Lamar County. See the other towns we cover on the Lamar County page or the full service areas list.
Choosing somebody to do our Floors was a hard decision but I am so happy we picked ICM coating masters. The results are beautiful and The time and effort put into the work was amazing.Verified review
How the day runs
Moisture gets tested before resin gets opened. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. Most houses are done inside a day, then 12 hours to foot traffic.
Kevin founded ICM Coating Masters in 2021 and still runs jobs himself. Nothing gets lost between the quote and the floor because it is the same people doing both.
Furniture and jack stands want pads under them. Point loads with sharp edges are the realistic way a residential floor gets damaged. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Oak Grove questions
Do you cover Oak Grove?
Yes. We are based in Laurel and Oak Grove is inside our normal working radius.
How long does a garage take?
Residential floors are usually a one day job start to finish.
What is the slab likely to need?
Fast-growing area west of Hattiesburg with a lot of new construction, so slab age and cure state are the first questions.
Can you match a colour?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Lamar County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Call us and we will be straight with you about the options.
Since 2021 this has been Kevin, Aaron, Kyler and Averie. No subcontractors sent in your place. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.