New Hope floor coatings, done in a day
Our home county. Laurel and Ellisville between them cover most of what we do close to the shop. We grind, coat and topcoat in one visit on most residential jobs.
Jones County, MS
Floors we coat around New Hope
Our home county. Laurel and Ellisville between them cover most of what we do close to the shop.
Salt is the quiet problem on coast jobs. It comes in on tires, soaks into unsealed concrete, and sits there pushing back out. Grinding removes the loaded surface layer so the new floor is not fighting it from day one.
What a New Hope job usually involves
Most of what we do in a town like this is residential garages, and the pattern repeats: a slab poured with the house, sealed once by a previous owner, and now dusting badly and stained where the car parks. The fix is mechanical. Grind the sealer off, open the concrete, patch what needs patching and build the system back up properly.
Most of our residential installs are complete within a single working day.
Pool surrounds are seasonal work here. The concrete gets hot underfoot and slick when wet, and a textured coating with a cooler pigment fixes both.
Most of what we do in a town like this is residential garages, and the pattern repeats: a slab poured with the house, sealed once by a previous owner, and now dusting badly and stained where the car parks. The fix is mechanical. Grind the sealer off, open the concrete, patch what needs patching and build the system back up properly.
The slab decides the spec.
Before we quote anything
Exterior concrete has UV and thermal cycling on top of everything else. Materials that are fine indoors amber and chalk outside, so exterior work gets a UV-stable topcoat as standard.
Coving at the wall turns a floor into a sealed basin. In kitchens, kennels and wet rooms that detail is the whole point, because water stops finding the joint between floor and wall.
Living with it afterwards
Pressure washing exterior coated concrete is fine at sensible pressure. Holding a turbo nozzle in one place is not.
If a crack appears in the slab years later, that is the concrete moving, not the coating failing. It can be chased and repaired without redoing the floor.
Most asked for here
Everything else is on the services page.
Commercial work around New Hope
A fair amount of our work around here starts as a phone call about dust. Unsealed concrete sheds fine powder constantly, it gets into everything stored in the garage, and no amount of sweeping fixes it because the floor itself is the source.
Storage rooms, laundry rooms and utility spaces come up often enough to mention. Small floors, quick installs, and usually the same system as a garage at a smaller scale.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the color
Slabs with in-floor heat or embedded conduit change how aggressively we can grind. We locate it first rather than finding it with a diamond.
Commercial slabs that have been in service take oil deep into the pores. Surface degreasing does not reach it, and resin will not bond through it. We grind it out, and where contamination runs deep we prime with something built to tolerate it.
Cure times are temperature dependent, and a garage in August behaves differently from the same garage in January. We schedule around it rather than pretending it does not matter.
Grinding is most of the job.
Getting to you
Laurel is home, and from here we reach Hattiesburg, Jackson, the Gulf Coast, coastal Alabama and the north shore of Lake Pontchartrain comfortably. Coast jobs and Baldwin County work are a normal week for us.
New Hope sits in Jones County. See the other towns we cover on the Jones County page or the full service areas list.
Aaron and his crew did a fantastic job, friendly and professional.Verified review
How the day runs
We test the slab before we promise a finish. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. Single day install is standard here. The waiting afterwards is just cure time.
Four names, one crew. Kevin Garner built the company in 2021 to pass it on. Nothing gets lost between the quote and the floor because it is the same people doing both.
In a commercial kitchen the cleaning routine is the maintenance plan, and the floor is specified around the chemistry you already use. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
New Hope questions
Do you cover New Hope?
Yes. We are based in Laurel and New Hope is inside our normal working radius.
How long does a garage take?
A typical garage is a one day install. You are walking on it that evening.
What is the slab likely to need?
Our home county. Laurel and Ellisville between them cover most of what we do close to the shop. Slabs with in-floor heat or embedded conduit change how aggressively we can grind. We locate it first rather than finding it with a diamond.
Can you match a color?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Jones County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Ring the shop and we will tell you honestly what it takes.
This is a family crew. Kevin founded it in 2021 and works alongside Aaron, Kyler and Averie. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.