Brandon floor coatings, done in a day
Heavy new-build growth east of Jackson, which means a lot of recently poured garage slabs that need a proper cure before coating rather than a fast turnaround. We are in and out in a day on most garages, then the floor cures.
Rankin County, MS
Floors we coat around Brandon
Heavy new-build growth east of Jackson, which means a lot of recently poured garage slabs that need a proper cure before coating rather than a fast turnaround.
New pours need to cure before they are coated, and the wait is longer than most people expect. Coating green concrete traps water under the film. We would rather push the date than come back to a blistered floor.
What a Brandon job usually involves
Sheds and outbuildings on slab are worth coating if they are being used for anything beyond storage. Unsealed concrete in an outbuilding is the dustiest floor most people own.
One day install, 12 hours to walk, 48 to drive.
Church halls, small offices and community buildings turn up in most towns we work in, and those are almost always scheduled around a calendar rather than around us.
A fair amount of our work around here starts as a phone call about dust. Unsealed concrete sheds fine powder constantly, it gets into everything stored in the garage, and no amount of sweeping fixes it because the floor itself is the source.
The slab decides the spec.
Before we quote anything
A slab that has been acid etched instead of ground has an inconsistent profile. Some areas take the coating and some do not, and you cannot tell which until it fails. We grind regardless of what was done before.
Epoxy is the body of the system and polyaspartic is the armour. The epoxy bonds and builds thickness, the topcoat takes the abrasion and the UV. Using one without the other is where most cheap floors go wrong.
Living with it afterwards
Warehouse floors want a scrubber with the right pad, not the most aggressive one available.
Snow and road salt tracked in should be rinsed off rather than left to dry. Salt is more aggressive to the concrete than to the coating.
Most asked for here
Everything else is on the services page.
Commercial work around Brandon
Most of what we do in a town like this is residential garages, and the pattern repeats: a slab poured with the house, sealed once by a previous owner, and now dusting badly and stained where the car parks. The fix is mechanical. Grind the sealer off, open the concrete, patch what needs patching and build the system back up properly.
Humidity is the constant in this part of the state. It affects cure times, it affects how the resin flows, and in summer it means working earlier in the day rather than pushing through the afternoon.
The full roster runs to seventy five different rooms, from garages through to food plants and clean rooms. It is all on the services page.
Why the prep matters more than the colour
Slabs with in-floor heat or embedded conduit change how aggressively we can grind. We locate it first rather than finding it with a diamond.
Salt is the quiet problem on coast jobs. It comes in on tyres, soaks into unsealed concrete, and sits there pushing back out. Grinding removes the loaded surface layer so the new floor is not fighting it from day one.
Everything we install is a system that has been tested as a system. That is the practical value of working to a manufacturer spec instead of improvising.
Grinding is most of the job.
Getting to you
The service area runs from Jones County out to the coast and along it. Gulfport, Biloxi, Ocean Springs and Pascagoula in Mississippi, Gulf Shores and Foley in Alabama, Covington and Slidell in Louisiana.
Brandon sits in Rankin County. See the other towns we cover on the Rankin County page or the full service areas list.
Aaron and his crew did a fantastic job, friendly and professional.Verified review
How the day runs
The slab sets the spec, not the brochure. We arrive with the grinder and the dust extraction, and the first stretch is noise and containment rather than anything that looks like progress. Getting the slab open and clean is what the rest of the day depends on.
Cracks get chased out and filled, high spots come down, and any old coating comes off rather than getting buried. Then the primer goes on and the day becomes a sequence with cure windows in it. Most jobs need one day of our time and none of yours.
The crew is family. That is why the quote and the finished floor match. Nothing gets lost between the quote and the floor because it is the same people doing both.
In a commercial kitchen the cleaning routine is the maintenance plan, and the floor is specified around the chemistry you already use. If you want to see blends first, the chip deck comes to you, and there are finished floors on the gallery page.
Brandon questions
Do you cover Brandon?
Yes. We are based in Laurel and Brandon is inside our normal working radius.
How long does a garage take?
You lose the garage for a day, not a week.
What is the slab likely to need?
Heavy new-build growth east of Jackson, which means a lot of recently poured garage slabs that need a proper cure before coating rather than a fast turnaround.
Can you match a colour?
Yes. The chip deck comes to you so you choose against your own light.
Do you do commercial work here?
Yes. Shops, kitchens, clinics and warehouses across Rankin County.
How do I get a quote?
Call 601-319-9619 and describe the room, or send the details and we will come look at the slab.
Speak to Kevin about what would work here.
The reason quality holds is that the family name is on every job. Covering Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. Send us the details or see finished floors.