Locker Room Epoxy that survives the room
Permanently damp and heavily disinfected. Residential floors are usually a one day job start to finish.
Slip-rated wet, which is the only rating that counts.
What we actually install
Quartz with coving to the drains, chemical tolerant.
The first hour on site is spent on the concrete, not the colour. Bare feet, showers and constant wetting.
Talk to us about this floor or call 601-319-9619.
How the day runs
Grind
Quartz with coving to the drains, chemical tolerant.
Build
Bare feet, showers and constant wetting.
Cure
Grind in the morning, coat in the afternoon, walk on it that night.
What the install actually looks like
Every job starts the same way, with the slab itself.
No two slabs in Jones County behave the same way. We turn up with the grinder and the extraction first, and the first hour is dust and noise rather than anything that looks like progress. Quartz with coving to the drains, chemical tolerant.
Once the slab is open and clean we chase any cracks, fill them, and grind those flat. Then the primer goes down, and from that point the day is a sequence with cure windows in it rather than a job you can rush. Grind in the morning, coat in the afternoon, walk on it that night.
Aaron, Kyler and Averie work with Kevin on every install. That is by design. That matters on a locker room epoxy job because the person who decided the spec is the person holding the squeegee, so nothing gets lost between the quote and the floor.
Aaron and his crew did a fantastic job, friendly and professional.Verified review
Other fitness floors we coat
The slab decides the spec.
What we find under a locker room epoxy job
Power troweled warehouse floors are the hardest substrate we deal with. The surface is dense, sealed by the process itself, and needs aggressive metal-bond diamonds before anything will stick.
Basement and below-grade slabs are damp by default. A coating that works in a garage will not necessarily hold down there, so those rooms get a system chosen for moisture rather than for looks.
The system we specify
Coving at the wall turns a floor into a sealed basin. In kitchens, kennels and wet rooms that detail is the whole point, because water stops finding the joint between floor and wall.
Quartz systems are built in layers, broadcast and troweled rather than rolled. It is slower to install and it is the toughest, grippiest thing we lay.
Specified from the load, not a brochure.
Impact is a different problem from wear
Most floors are specified for abrasion, which is a slow surface problem. A gym floor has to survive impact, which is a sudden structural one. A dropped barbell delivers its whole energy into a few square inches, and a thin rigid coating over concrete will spall at that point no matter how hard the topcoat is.
The answer is build thickness in the drop zones and a topcoat with some flexibility rather than maximum hardness. Under matting the coating still matters, because sweat and cleaning water get under mats and sit there. A sealed non-porous floor under the mats is what stops that becoming a smell you cannot find the source of.
Single day install is standard here. The waiting afterwards is just cure time.
What we specify for training floors
Permanently damp and heavily disinfected.
What this floor has to put up with
Bare feet, showers and constant wetting. Quartz with coving to the drains, chemical tolerant. That combination is what we specify against, and it is why a locker room epoxy job is quoted from the room rather than from a rate card.
Slip-rated wet, which is the only rating that counts. Most residential floors go down in a single day. Walk on it in 12 hours, move heavy things at 24, park on it at 48.
Living with the floor afterwards
Rubber mats left permanently on a coated floor can mark it. Not damage, but a visible outline. If you use mats, move them occasionally.
Sunlight through a garage door will fade a cheap floor unevenly along the door line. UV-stable topcoats exist precisely for that.
From Laurel we cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish. If you are inside about a hundred miles, we will come and look at the slab. See the areas we cover.
Questions we get asked
How many days do you need on site?
Residential floors are usually a one day job start to finish.
What is the prep work here?
Quartz with coving to the drains, chemical tolerant. We would rather spend the morning grinding than come back in a year.
How does it handle heavy use?
Bare feet, showers and constant wetting. We specify the build thickness against the actual use, not a standard sheet.
How far do you travel for this?
Yes. We cover south Mississippi, the coast, coastal Alabama and St. Tammany Parish, roughly a hundred miles out from Laurel.
Who actually does the work?
Family run out of Laurel since 2021, Duraflex certified.
Can I see the colour before deciding?
Yes. We bring the chip deck out and you pick the blend against your own light and your own walls. Colours read differently under LED, under a skylight and under a garage door that is half open, so choosing off a photograph is how people end up disappointed.
What if the concrete is in bad shape?
Garage aprons and interior slabs are usually separate pours at different times, and they move independently. The transition between them gets detailed deliberately so the coating does not split along that line.
How do I clean it?
A coated floor can be repaired in place. Damage gets ground back locally, rebuilt and blended, which is not possible with tile or with polished concrete.
Why does this outlast a cheap coating?
Coving at the wall turns a floor into a sealed basin. In kitchens, kennels and wet rooms that detail is the whole point, because water stops finding the joint between floor and wall.
Call us and we will be straight with you about the options.
Since 2021 this has been Kevin, Aaron, Kyler and Averie. No subcontractors sent in your place. Serving Laurel and south Mississippi, the Gulf Coast, coastal Alabama and St. Tammany Parish. See finished floors or get in touch.